Roof Replacement for Pompano Beach Homes and Businesses
We take the old roof off to the deck and put on a new shingle, tile or metal roof. Homes and commercial buildings, from the permit to the final inspection, with the whole job quoted in writing before we start.
We answer the phone or call back the same working day. Outside Monday to Saturday, 8 am to 9 pm, leave a message and we return it the next working morning.
On the roof
- Shingle
- Tile
- Metal
- Flat roofs
- Free estimates
- Mon–Sat 8 am – 9 pm
- Written scope first
- Nail sweep when done
Roof replacement
Roof Replacement in Pompano Beach
We replace residential and commercial roofs, from a single-story house to a multifamily building. When a roof is old, leaking in more than one place or worn down by storms, we tear it off to the deck and put on a new shingle, tile or metal roof.
Roofers call it a "re-roof" or a "tear-off": the old covering comes off, the plywood deck is checked and re-nailed, a sealed secondary barrier and new flashing go on, and then the new roof. Replacement is the right answer for an old roof and for one with widespread damage, repeated leaks or a structure that is deteriorating. One leak in an otherwise sound roof is a repair, and we will tell you so.
Not sure which yours is? An inspection settles it before anyone quotes you a roof.
Tear-off to dry-in
Services
Roofing Services
These are the roofing services we offer, each with its own card here and its own page: repairs, inspections, leaks, storm damage, emergencies and every common roof type.
-

Roofer
A roofer repairs, inspects and replaces roofs of every common material, from one leak to a full tear-off. Shingle, tile, metal and flat roofs, on houses and on commercial buildings.
- Repairs, from one lifted shingle to a failed valley
- Inspections with a written report of what we found
- Full tear-off and replacement, permit to final inspection
-

Roof Repair
Roof repair fixes lifted shingles, cracked tiles, failed flashing and worn spots before water reaches the deck.
Roof Repair -

Roof Inspection
A roof inspection checks the covering, flashing, penetrations and drainage, then reports the roof's condition and how much life it has left.
Roof Inspection -

Emergency Roof Repair
Emergency roof repair stops water coming through an opened roof with a tarp or shrink wrap until the permanent repair is made.
Emergency Roof Repair -

Roof Leak Repair
Roof leak repair traces a leak back to where water actually enters the roof, often well uphill of the stain, and seals that point.
Roof Leak Repair -

Metal Roofing
Metal roofing installs standing seam or other metal panels, fastened so the metal can move with the heat.
Metal Roofing -

Flat Roof Repair
Flat roof repair fixes ponding water, blisters and open seams on low-slope membrane roofs.
Flat Roof Repair -

Storm Damage Roof Repair
Storm damage roof repair documents and repairs lifted shingles, broken tiles and torn edges after high wind.
Storm Damage Roof Repair -

Skylight Repair
Skylight repair reseals, reflashes or replaces a skylight where it meets the roof.
Skylight Repair -

Tile Roofers
Tile roofers repair, re-underlay and replace concrete and clay tile roofs. On a tile roof the underlayment is the real waterproofing.
Tile Roofers -

Roof Coating
Roof coating restores a sound low-slope roof with a fluid-applied membrane over the existing surface.
Roof Coating -

Commercial Roofing
Commercial roofing repairs and replaces membrane, metal and coated roofs on business and multifamily buildings.
Commercial Roofing -

Cedar Shake Roofers
Cedar shake roofers repair split and missing shakes or replace a worn shake roof.
Cedar Shake Roofers
Repair or replace
When a Roof Needs Replacing
Replacement is the answer for an old roof, or one with widespread damage, repeated leaks or a deteriorating structure. One bad spot on a sound roof is a repair. A roof that needs a repair every rainy season is telling you something.
What about a "roof-over", new shingles laid over the old ones? We do not recommend it. Overlaying adds weight that can damage the structure over time, and it hides the underlayment and the deck so nobody can inspect or repair them. A tear-off shows us what the roof is really sitting on, and that is the roof we build back from.
If you are weighing whether to repair or replace, tell us what you are seeing when you call and we will say which one we would do on our own house.
The process
How a Roof Replacement Runs
A replacement runs from the permit through tear-off, deck work, the sealed barrier, flashing and underlayment and a mid-job inspection to the new covering, usually over a few days.
- Estimate and written scope
We look at the roof, measure it and write the whole job down: inclusions, exclusions and unit prices for any deck repair nobody can see yet.
- The permit
Re-roofing needs a building permit, pulled before work starts. Tear-off waits on its approval.
- Tear-off to the deck
The old roof comes off down to the plywood. Rotten decking is replaced and the whole deck is re-nailed to code.
- Sealed secondary barrier
A self-adhering modified bitumen sheet goes directly onto the deck, the "peel-and-stick" that keeps water out even if the covering lifts.
- Flashing and underlayment
New drip edge, valley metal and vent flashing go on, with extra layers at every penetration, and then the underlayment over the whole deck.
- In-progress inspection
The building department inspects the dry-in before the new roof covering goes on.
- The new roof
Shingle, tile or metal goes on over the inspected underlayment, with the ridge, hips and edges finished last. Most residential replacements take a few days, and shingle usually goes on faster than tile or metal.
- Cleanup
The old roof is hauled away and magnets are run across the property to pick up stray nails before we leave.
Drip edge, before underlayment
What it costs
Roof Replacement Costs
What a new roof costs depends on its size, the material, the pitch, access and what we find under the old roof. The published range for the area is in the panel beside this, and it is the trade's range, not a quote. The exact number comes from measuring your roof.
Roofers price by the "square", which is 100 square feet of roof surface. The square count follows the roof surface, not the home's floor area, because pitch, hips and valleys add surface beyond the footprint of the house.
From there the price moves with the material, the pitch, access to the roof, its existing condition and any structural or decking repairs. Damaged decking or rafters found under the old roof are the common hidden cost, which is why a good scope prices deck repair by the unit before anyone climbs up.
$6,573 to $8,413
The figure published for Pompano Beach homeowners. Across every size and material the published span is wider, from $4,100 to $25,600 a roof.
- Roof size, counted in squares
- Material: shingle, tile or metal
- Pitch and access to the roof
- Decking found rotten under the old roof
Free and no obligation. We quote the whole job before we start, with no surprise charges after.
Shingle, Tile and Metal Roofs
Architectural shingles, concrete and clay tile and standing seam metal are the common options here, and they differ in installed cost, weight and life.
| Material | Installed cost | Weight | Typical life |
|---|---|---|---|
| Architectural shingleGAF Timberline HD is a widely used line | Lowest | Light | 20 to 30 years. Goes on fastest. |
| Concrete tileFlat or barrel profiles | Lower middle | Heavy | Long. The underlayment beneath is the real waterproofing. |
| Standing seam metalConcealed fasteners | Upper middle | Light | 50 years or more. Panels fastened to move with the heat. |
| Clay tileBarrel, also called mission tile | Highest | Heavy | Long. The underlayment beneath is the real waterproofing. |
What the Written Scope Should Cover
These belong in the written scope before any work starts, so the price you sign is the price you pay.
- Tear-off and disposal. The old roof off to the deck and hauled away.
- Deck repair unit prices. A price per sheet for plywood nobody can see yet, so a rotten deck is not a surprise.
- Flashing and underlayment. New drip edge, valley and vent flashing, the sealed secondary barrier and the underlayment, all named.
- Carpentry such as fascia. Trusses, decking, fascia and furring called out where the roof needs them.
- Nail sweep and cleanup. Debris gone and magnets run across the property for stray nails.
Solar Panels and a New Roof
Solar panels come off before the roofing work starts and go back on after the new roof passes inspection.
Removing and reinstalling the panels is a separate cost in the replacement, so ask for it as its own line in any scope you compare. Tell us about the panels on the call and we will plan the job around them.
Service area
Towns Served Nearby
We work throughout town and the surrounding area, within about 20 miles. Fort Lauderdale is a short drive south and Coral Springs a short one west, and each town we serve has its own page with what we see on roofs there.
A job outside this footprint is a question for the call.
Roof Replacement Service AreaAlso nearbySea Ranch Lakes, Lighthouse Point, Lauderdale-by-the-Sea, Coconut Creek, Hillsboro Beach, Oakland Park, Margate and Deerfield Beach.
Our working radius
Mon–Sat 8 am – 9 pm · Free estimates across the area
Ready for a Roof Done Right?
Free, no-obligation estimates on every roof, house or commercial building.
We quote the whole job before we start, with no surprise charges after, and we clean up when the work is done.
Call for a Free EstimateWe show up when we say we will, and we answer the phone or call back the same working day.